3
Product introduction
Control panel
：
For the first use
As there is manufacturing residue or oil remained in the toaster or heat element, it usually will
emit the odors for the first use. It is normal and will not occur after several times use, for the first
use it is suggested to operate according to the below steps, except without bread. Then let the
toaster cool down and begin toasting the first slice.
Operation:
1. Put bread slice into the bread slot, it can be inserted two slices at most every time (see fig.1).
If only toasting one side or irregular bread, the bread must be put on the toast rack, only toast
one piece every time. When toasting on the toast rack, press rack control handle to make the
toast rack uplift, then put the bread on the toast rack (see fig.2). Lift the rack control handle to
reset the rack when do not use.
Note: 1. Make sure the crumb tray is completely positioned in place before using.
2.Before toasting on the toast rack, let the appliance cool down.
Crumb tray
Housing
Carriage handle
Bottom
Control panel (see below)
Indicator
Color control knob
Toast rack
Bread slot
Rack control handle
