background image

TT1 

 1  

“TATTLE-TALE” 

TELEPHONE  

RECORDER KIT 

Ramsey Electronics Model No.     TT1 

Ever want to tape that annoying or obscene phone call? Want 
to find out who is making those long distance calls from your 
phone? Or how about taping that call just to remember what 
was said. The TT1 was designed with you in mind. Easy to 
construct  and use - an ideal first kit !    
 

Complete “hands off operation”! Turns on when you pick-up the 
phone, turns off when you hang-up. 

No line noise to alert callers of taping! 

Can be connected to any modular phone jack or directly to 
telephone line terminal block. 

Easily connected to any tape recorder with remote                        
and mike jacks! 

Play back the tape to our TG2 “Tone Grabber” to read out what 
number was called! 

Superior performance!  

Very clean, low noise sound. Excellent audio quality. 

Unit runs on telephone line power-no need for batteries or external 
power supplies. 

Complete and informative instructions guide you to a kit that works 
the first time, every time - enhances resale value, too! 

Add our case set for a finished “Pro” look. 

 

Summary of Contents for TATTLE-TALE TT1

















Reviews: