AM1
•
17
wind consecutive “loops” around the
tube.
For a frequency of 1000 KHz (or 1
MHz) you’ll need to wind 190 turns of
wire around the tube for the proper
inductance!
Connect an 8 foot whip antenna to one
end of the coil and the other end to the
center pin of the antenna output jack.
Experiment with different designs to
determine which antenna type works
best for you.
CONCLUSION
We sincerely hope that you have enjoyed the construction and use of this
Ramsey Kit. As always, we have tried to compose our manual in the easiest,
most “user friendly” format that is possible. As our customers, we value your
opinions, comments, and additions that you would like to see in future
publications. Please submit comments or ideas to:
Ramsey Electronics Inc.
Attn. Hobby Kit Department
793 Canning Parkway
Victor, NY 14564
And once again, thanks from the folks at Ramsey!
8 ' WHIP
PAPER TU
TO TRANSMIT
To Transmitter
Paper Tube
Summary of Contents for AM1
Page 6: ...AM1 6 PARTS LAYOUT DIAGRAM...