- 09 -
Angle Grinder18V
Owners Manual
24 | English
1 609 92A 47F | (14.11.17)
Bosch Power Tools
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1
Unlocking
lever for protection guard
2
Direction-of-rotation arrow on housing
3
Spindle lock button
4
On/Off switch
5
Battery
*
6
Battery
release
button*
7
Auxiliary handle
8
Protection guard for grinding
9
Hub
flange with O-ring
10
Grinding
Disc
*
11
Quick-clamping nut with bar
12
Carbide grinding head*
13
Protection guard for cutting*
14
Cutting disc*
15
Handle (insulated gripping surface)
16
Grinding spindle
17
Hand guard*
18
Rubber sanding
pad
*
19
Abrasive disc
*
2
0
Round nut*
2
1
Cup brush*
22
Diamond core cutter*
2
3
Button for charge
indicator
24
Battery charge indicator
2
5
Cutting guide with dust extraction protection guard *
2
6
Diamond cutting disc*
*Accessories shown or described are not part of the standard de-
livery scope of the product.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for cutting, roughing and brushing of
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.
The light of this power tool is intended to illuminate the power
tool’s direct area of working operation and is not suitable for
household room illumination.
Technical Data
Angle Grinder
* depending on the battery pack being used
** limited performance at temperatures <0 °C
OBJ_BUCH-3456-001.book Page 24 Tuesday, November 14, 2017 1:42 PM
CBAGR18
English | 25
Bosch Power Tools
1 609 92A 47F | (14.11.17)
Rated voltage
V=
18
Rated speed
min
-1
9000
Grinding disc diameter, max.
mm
125
Thread of grinder spindle
M 14
Thread length (max.) of grinder spindle
mm
22
Kickback stop
Restart
Protection
Speed preselection
–
Weight according to EPTA-Procedure
01:2014
– with vibration-damping auxiliary handle
– with standard-auxiliary handle
kg
kg
2.6 – 2.8*
2.4 – 2.6*
Permitted ambient temperature
– during charging
– during operation
**
and during storage
°C
°C
0...+45
–20...+50
Recommended batteries
CBBAT18...
Recommended chargers
CBCHR18
Angle Grinder
CBAGR18
* depending on the battery pack being used
** limited performance at temperatures <0 °C
OBJ_BUCH-3456-001.book Page 25 Tuesday, November 14, 2017 1:42 PM
Run-out brake
26 | English
1 609 92A 47F | (14.11.17)
Bosch Power Tools
Noise/Vibration Information
Sound emission values determined
according to EN 60745-2-3.
Typically the A-weighted noise levels of the
product are
Sound pressure level
Sound power level
Uncertainty K
Wear hearing protection!
dB(A)
dB(A)
dB
79
90
3
Vibration total values a
h
(triax vector sum)
and uncertainty K determined according to
EN 60745-2-3:
Surface grinding:
a
h
K
Disk sanding:
a
h
K
m/s
2
m/s
2
m/s
2
m/s
2
6.0
1.5
3.5
1.5
OBJ_BUCH-3456-001.book Page 26 Tuesday, November 14, 2017 1:42 PM
24 | English
1 609 92A 47F | (14.11.17)
Bosch Power Tools
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1
Unlocking
lever for protection guard
2
Direction-of-rotation arrow on housing
3
Spindle lock button
4
On/Off switch
5
Battery
*
6
Battery
release
button*
7
Auxiliary handle
8
Protection guard for grinding
9
Hub
flange with O-ring
10
Grinding
Disc
*
11
Quick-clamping nut with bar
12
Carbide grinding head*
13
Protection guard for cutting*
14
Cutting disc*
15
Handle (insulated gripping surface)
16
Grinding spindle
17
Hand guard*
18
Rubber sanding
pad
*
19
Abrasive disc
*
2
0
Round nut*
2
1
Cup brush*
22
Diamond core cutter*
2
3
Button for charge
indicator
24
Battery charge indicator
2
5
Cutting guide with dust extraction protection guard *
2
6
Diamond cutting disc*
*Accessories shown or described are not part of the standard de-
livery scope of the product.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for cutting, roughing and brushing of
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.
The light of this power tool is intended to illuminate the power
tool’s direct area of working operation and is not suitable for
household room illumination.
Technical Data
Angle Grinder
* depending on the battery pack being used
** limited performance at temperatures <0 °C
OBJ_BUCH-3456-001.book Page 24 Tuesday, November 14, 2017 1:42 PM
CBAGR18