– 5 –
BUS Fader Strip
BUS Fader Strip
There are four BUS Fader Strips on the
DA7. In
conjunction with the Fader Layer controls, each strip directly
controls the BUS outputs, or the AUX/BUS functions which
are indicated on the bottom of the strip or a user
CUSTOM/MIDI function.
The SOLO LED button toggles on
(red) or off. When on, the
selected bus output will be routed to the MONITOR A
speakers and headphones, overriding the previous input.
There are two bus numbers for each strip, indicating the
BUS ASSIGN selections that can be controlled by the strip.
The FLIP LED button flips the BUS Fader Strip from
controlling one bus to controlling the other bus for the strip.
The LED color
(red or green) indicates the current bus
selection.
The SELECT LED button, when on
(orange), identifies the
bus strip as the current bus strip selected. Only one BUS
Fader Strip can be selected at a time unless they are paired
for LINK or STEREO operation.
The ON LED button toggles on
(red) and off. When on, the
bus output is active.
The AUX/BUS indication at the bottom of the BUS Fader
Strip indicates the strip function when the AUX/BUS Fader
Layer control is selected.
See Chapter 6, Fader Layers and Channel Strips in the
Users' Guide for additional information.
MASTER L/R Fader Strip
MASTER L/R Fader Strip
The MASTER L/R Fader Strip controls the
DA7 master L/R
output.
The SELECT LED button, when on
(orange), identifies the
strip as the current fader strip selection.
The ON LED button toggles on
(red) and off. When on, the
master output is active.
See Chapter 6, Fader Layers and Channel Strips in the
Users' Guide for additional information.
Fader Layer Controls Section
Fader Layer Controls Section
The Fader Layer controls significantly expand the flexibility
of the
DA7 mixer. The LED button selections define the
current function for the fader strips.
LED buttons for the Fader Layer controls assist you in
determining or checking the current channel and bus fader
settings on the mixer.
INPUT 1-16, when selected
(green), resets the fader strips
to control channel inputs 1 through 16, and buses 1, 3, 5,
and 7. When selected, the faders move to the positions
reflecting the current settings for the layer, unless previously
flipped. To reset a flipped Channel Fader Strip, press the
FLIP button. To reset all the currently flipped Channel
Fader Strips, press the INPUT 1-16 Fader Layer control
button and hold it or two seconds. This will set all faders to
the selected layer.
Fader
AUX/BUS Layer function
SOLO LED button
FLIP LED button
SELECT LED button
ON LED button
Bus Assign
numbers
9
Fader
AUX/BUS Layer function
SELECT LED button
ON LED button
10
11
INPUT 1-16 LED
button
(green)
INPUT 17-32 LED
button
(red)
AUX/BUS LED button
(orange)
CUSTOM/MIDI LED
button
(orange)
