background image

 

           

RAMROD WARRANTY 

 

 

The RAMROD EQUIPMENT warrants each new RAMROD Mini-Skid to be free from proven 
defects in material and workmanship under normal use and maintenance for a period of twelve 
(12) months, commencing with delivery to the original buyer.  Under conditions of this warranty, 
the  Mini-Skid  must  be  operated  according  to  manufacturer’s  instructions,  and  by  a  competent 
and careful operator. 
 
This  warranty  shall  not  apply  to  the  Mini-Skid  on  any  part  thereof,  which  has  been  subject  to 
misuse, negligence, alteration, accident, or used in any way, which, in the manufacturer’s option, 
adversely affects its performance. 
 
It is the responsibility of the Buyer, at his expense, to transport the Mini-Skid or any part thereof 
in fulfilling this warranty to a designated service shop. 
 
In no event shall the Buyer be entitled to recover for incidental or consequential damages such 
as,  but  not  limited  to,  rental  of  replacement  equipment,  loss  of  profits,  and  loss  of  Mini-Skid 
fluids and lubricants. 
 
This warranty does not extend to Mini-Skid components such as, but not limited to, engine, tires, 
batteries, hydraulic/hydrostatic components which are manufactured by others, and which carry 
separate warranties of their respective manufacturer’s. 
 
This warranty is in lieu of all other warranty expressed or implied, and there are no warranties of 
merchantability or fitness for a particular purpose. 
 
No  representative  of  the  manufacturer,  nor  the  selling  dealer  has  authority  to  change  this 
warranty in any manner whatsoever. 
 

Printed in Canada 

 
 
 
 

NOTE:  In order for warranty to be in effect, the following warranty 
registration forms must be completed and one copy sent to Ramrod 
Equipment at time of sale. 

Summary of Contents for 950


































Reviews: