Installation Instructions
TrailView Soft Top
™
For proper installation and best possible fit, please read all instructions BEFORE you begin.
Important Safety Information
NOTE: Actual product may vary from illustration.
Contents
Soft Top Assembly x1
(main fabric, side windows, rear windows)
End Clamp Main Body x2
Door Surround Set x1
Tailgate Bar x1
Allen Key x2
Hook & Loop Strip x2
(for door surround)
(SM) Short Middle Knobs x2
(LF) 60mm Long Front Knobs x2
(LR) 70mm Long Rear Knobs x2
Retractable Trailview
Hardware x1
Self-Drilling Screws x30
Short Middle Knobs x2
Tailgate Bar x1
Anti-Puddle Poles x2
End Clamp Backing x2
Tools Required
Torx Bits
Allen Wrench
Safety Glasses
Ratchet and extensions
Phillips screwdriver
Pre-Installation Requirements
• Remove existing hard or soft top. For OEM (original/factory) soft tops, also remove:
• Windshield header bar
• Tube frame hardware from roll bar
• Side door surrounds
• Rear window, tailgate bar, tailgate clips
• Periodically check all components for tightness.
• Be sure to where safety goggles while installing.
• When using power tools, read and understand all operating instructions
Page 1 of 11
