background image

!

When cleaning the interior of the vehicle, do not get water or cleaning fluids on the unit.

!

The CD player is a precision instrument and will not operate properly in extreme hot or
cold.  In case of such conditions, wait until the interior temperature of the vehicle reaches
a normal temperature before using the player.

!

If the temperature inside the player gets too hot, a protective circuit will automatically
stop play of the disc.  In this case, allow the unit to cool off before operating the player
again.

!

Never insert anything other than a 5" (12 cm) compact disc into the player as the
mechanism can be damaged by foreign objects.

!

Do not attempt to use 3" (8 cm) CD-Single discs in this unit, either with or without an
adaptor, as damage to the player and/or disc may occur.  Such damage will not be
covered by the Warranty on this product.

!

When not using the disc player, always remove the compact disc.

!

When the vehicle warms up during cold weather or under damp conditions, moisture may
condense on the lens of the disc player.  Should this occur, the player will not operate
properly until the moisture has evaporated.

!

The unit is designed with a vibration dampening CD mechanism to minimize interruption
of disc play due to normal vibration in a moving vehicle.  When driving on very rough roads,
however, occasional sound skips may occur.  This will not scratch or damage the disc
and normal play will resume when the rough conditions cease.

HANDLING COMPACT DISCS

Dirt, dust, scratches, and warpage can cause skips in the playback and deterioration of
sound quality.  Please follow these guidelines to take care of your compact discs:

!

Use only compact discs with the mark:  

!

Fingerprints, dust, and dirt should be carefully wiped off the disc’s playing surface (shiny
side) with a soft cloth.  Wipe in a straight motion from the inside to the outside of the
disc.

!

Never use chemicals such as record sprays, household  cleaners or  thinner  to clean
compact discs.  Such chemicals can irreparably damage the disc’s surface.

!

Discs should be kept in their storage cases when not in use.

!

Do not expose discs to direct sunlight, high temperatures or high humidity for extended
periods.

!

Do not stick paper, tape, or labels on the disc surfaces nor write on them with any type
of marker.

SPECIFICASPECIFICASPECIFICASPECIFICASPECIFICA

TTTTT

IONS / CAIONS / CAIONS / CAIONS / CAIONS / CA

RE ARE ARE ARE ARE A

ND MAND MAND MAND MAND MA

INTENAINTENAINTENAINTENAINTENA

NCENCENCENCENCE

18

18

18

18

18

 CA CA CA CA CA

RE ARE ARE ARE ARE A

ND MAND MAND MAND MAND MA

INTENAINTENAINTENAINTENAINTENA

NCENCENCENCENCE

Summary of Contents for 1286649





















Reviews: