will also be canceled by activating the Re-
peat Play
cp
or Shuffle Play
cq
functions.
cp
TRACK REPEAT PLAY SELECT (RPT)
During disc play, press this button to repeat
the play of the selected track (S--RPT will
appear on the display panel). Play of the
track will continue to repeat until the button
is pressed again and the S--RPT indica-
tion disappears from the display panel. Re-
peat Play mode will also be canceled by acti-
vating the Track Scan
co
or Shuffle Play
cq
functions.
cq
SHUFFLE PLAY SELECT (SHF)
During disc play, press this button to play the
tracks on the disc in a random shuffled order
(S--SHF will appear on the display panel). In
Shuffle Play mode, pressing the Forward
Track Select (
) or Backward Track Select
(
) will also select tracks in a random order
instead of the normal progression.The Shuffle
Play mode can be cancelled by pressing the
button again (S--SHF indication will disappear
from the display panel) or by activating the
Repeat Play
cp
or Track Scan
co
functions.
cr
DISC EJECT ( )
When this button is pressed, disc play is
stopped, the disc is ejected and the unit will
change to radio operation (EJECT will briefly
appear on the display panel). If the disc is not
removed from the unit within 15 seconds,
the disc will be re-loaded (S--CDP will reap-
pear).
cs
T I M E / F R E Q U E N C Y ( T / F ) S E L E C T
Press this button to call the time display on
the incorporated quartz clock. Press the but-
ton again to return to radio frequency or disc
display or it will return automatically after 5
seconds.
ct
THEFT-DETERRENT LED
Located on the chassis behind the front
panel, a light-emitting diode (LED) will flash
10
10
10
10
10
OPEROPEROPEROPEROPER
AAAAA
TTTTT
ING INSTRUCING INSTRUCING INSTRUCING INSTRUCING INSTRUC
TTTTT
IONSIONSIONSIONSIONS
when the panel is removed. The flashing light
serves as a visual warning to the would-be thief
that the unit has been disabled by removal of the
front panel.
cu
RESET BUTTON
A RESET button is located on the front of the
chassis above the theft-deterrent LED(front panel
must be removed to access the button). The re-
set circuitry is provided to protect the micropro-
cessor circuitry and should only be activated un-
der the following circumstances:
1. Upon initial installation after all wiring is
completed.
2. If there is a malfunction of any of the
switches on the unit or of the CD player,
pressing the RESET button may clear the
system and return to normal operation.
dl
FRONT PANEL RELEASE BUTTON (
)
This button is used to release the mechanism
that holds the front panel to the chassis. To de-
tach the front panel, press the button so that the
left side of the panel is released. Grasp the re-
leased side and pull it off of the chassis. To re-
attach the panel, position the right side of the panel
in place first and then press the left side of the
panel until the mechanism locks it into place.
NOTES ON USE OF FRONT PANEL
1. Make sure the front panel is right-side-up when
attaching it to the chassis as it cannot be
attached when up-side down.
2. Do not press very hard on the front panel
when attaching it to the chassis. No
more than light to moderate pressure
should be needed.
3. When attaching the front panel, make
sure the right side is correctly engaged
before pressing the left side to lock it into
position.
4. When taking the front panel with you,
please use the supplied carrying case to
protect the panel from dirt and damage.
