© Copyright 2007-2008 RAMMTLC, LLC
ROUTINE FOLLOW-UP MAINTENANCE BETWEEN
USES
Remove and discard pads and handlebar grips as needed.
According to the new FDA regulations, foam handlebar grips
should be replaced with each new user – they are designed to
last about 7 weeks. Rubber grips that can be sanitized are
available for purchase!
Clean and disinfect wheels by scrubbing with cleanser and a
mildly abrasive scrubbing pad. Wipe down entire machine with
sanitizing solution or spray. Be sure to wipe equipment dry and
recommend to users that they keep the equipment dry after using
in a wet environment – it will extend the life of the equipment.
WD40 helps minimize corrosion and helps displace accumulated
moisture. Be careful to remove any excess lubricant.
Check platform for ease of removal. If the post sticks return the
platform to the down position and inspect the post holes for
burring. Use a round file to remove burring and recheck for
ease of movement. If the post is loose, insert a 1 or 2 thin
plastic shim.
Check wheels for excessive wear. Rotate or replace as needed.
If the wheel is removed or replaced, use the following
procedure:
1.
Remove and replace bolt with new grade 10.9 wheel
bolt. 60mm on front end wheels, 80mm on back end
wheels. Replacement bolts are available for sale – call
or email
