9
User Instructions
EN
SETUP
1. CAMERA SETUP
1.1. Power Supply - Using AC Power or Power Bank
Plug one end of the provided power adapter into a wall outlet and the other end into the back
of the camera. Or use a cable to connect to your Power Bank (Power Bank not included). The
camera automatically turns on when plugged in. See Fig. 3.
Note:
Use the adapter or Power Bank labeled OUTPUT: DC 5V 2.0A for the camera.
1.2. Fine Tuning
Place the camera in a convenient location, point the lens toward the observation area.
1.3. Night Vision
The camera has eight high-intensity LEDs for picking up clear images in the dark. When the
light sensor detects low ambient light levels, the LEDs will be automatically activated.
1.4. Room Temperature Measurement
The temperature sensor can measure the room temperature on the camera side and the
room temperature indicator will be displayed on the screen of the monitor unit.
2. MONITOR SETUP
2.1. Power Supply - Using AC Power
The monitor has a built in 3.7V 2600mAh (Li-ion) battery and uses household AC power
current.
1. Plug one end of the provided power adapter into a wall outlet and the other end into the
monitor. See Fig. 4.
Note:
Use the adapter labeled OUTPUT: DC 5V 1.0A for the monitor.
2. Slide the Power switch to ‘‘ON’’. See Fig. 4.
Note 1:
When monitor is turned on, the green ‘‘Power‘‘ LED will light up.
When the battery is low, the red LED will start blinking. When the battery is charging,
the red LED will light up.
When charging finishes (fully charged), the ‘‘Power‘‘ LED will turn off (when the
monitor is switched off).
Note 2:
‘‘Out of Range’’ will be displayed on the LCD screen if the monitor goes out of range.
2.2. Talkback Function
Press the talkback button
to speak through the camera unit, and the
icon will then
be displayed on the screen. See Fig. 5.
2.3. Volume Setting
Press the volume up or volume down buttons to adjust the volume level. See Fig. 6.
