RAMBO GB01LP, Assembly & Operating Manual

Page: 1 / 7

IMPORTANT:

READ THESE INSTRUCTIONS CAREFULLY

FAMILIARISE YOURSELF WITH THE APPLIANCE BEFORE CONNECTING IT TO A GAS
CYLINDER.

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

RETAIN THIS MANUAL FOR FUTURE REFERENCE

A LOW PRESSURE REGULATOR WITH AN OUTLET PRESSURE OF 2.75kPa AND HOSE
ASSEMBLY IS INCLUDED WITH THE APPLIANCE.
REGULATOR AND HOSE ASSEMBLY DETAILS
This appliance must be connected to a certified hose and regulator assembly to ensure safe operation as
follows: Propane Gas (LP) regulator fitted with a POL type inlet fitting, outlet pressure of 2.75kPa and Certified
to AS4621
and an 8mm nominal bore hose (maximum length 1.5 metres) certified to AS/NZS 1869 class ‘B’
or ‘D’. The hose outlet fitting required to ensure compatibly with the inlet connection of this appliances is ¼”
BSP female threaded nut and 60º inverted flare.
THE CORRECT ASSEMBLY MUST BE USED - DO NOT USE ADAPTORS
The use of any equivalent certified hose/regulator assembly compliant with the requirements above is
acceptable
WARNING: Only use the hose assembly supplied with this appliance for connection the cylinder - DO
NOT USE ADAPTORS
Please contact your supplier / distributor for replacement hose and regulator assembly.
The use of any equivalent LP gas regulator with hose assembly certified to AS4621 (maximum length 1.5
meters) and AS/NZS 1869 is acceptable
FOR OUTDOOR USE ONLY
A LOW PRESSURE REGULATOR MUST BE USED WITH THIS APPLIANCE
COUNTRY COOKERS
ASSEMBLY & OPERATING MANUAL
GB02LP
2 burner
country cooker
GB03LP
3 burner
country cooker
GB01LP
1 burner
country cooker