12
Battery Installation/Removal
To install the battery:
Find the battery baseplate that is located on the top of
the down tube. The battery and battery base plate are
designed to lock together to keep the battery from vibrating
on rough terrain. To lock battery to base plate turn key
clockwise.
Center the battery over the base plate and slightly forward,
then
slide the battery down to lock into place. Once in place
lock battery onto base plate using the key.
To remove the battery:
Turn key counter clockwise to unlock, then slide battery forward.
Charging Battery
o
Keep the Battery & charger away from water and open fire.
o
Battery must be charged fully prior to its first use.
We re
commend charging battery overnight the first time.
o
Always plug charger into battery before plugging in to electrical outlet.
o
Do not use the battery & charger for other purposes.
o
Do not connect positive and negative terminals
.
o
Keep the battery away from children and pets.
o
Do not subject the battery & charger to shocks (e.g. by dropping).
o
Do not cover the battery & charger or place objects on top of it.
o
Stop the charging procedure immediately if you notice a strange smell or smoke.
o
In the unlikely case that the battery is on fire, DO NOT try to put it out with water. Use sand instead and call
emergency services immediately
o
Battery may be charged on or off the Bicycle.
o
It is recommended to charge battery once every
2
months when stored for extended periods of time.
o
Connect power cord to charger and
only pl
ug into
a
normal household outlet 120 volt
o
Plug charger into battery port as shown.
See illustration.
o
Never charge your battery when battery temperature is below 32 degrees Fahrenheit, or 0 degrees Celsius.
o
Never store your battery in areas susceptible to high heat.
o
Use of battery in extreme temperatures will cause battery damage.
LED indicator colors
•
Green
– not connected or fully charged
•
Red
– battery is connected and charging normally
•
Red Flashing
– Battery or charger may be faulty.
