Cleaning and Maintenance
Cleaning
Glass surface should be cleaned regularly.
Avoid using acid or chlorine-based cleaning products.
Burner & grids can be removed and cleaned with appropriate detergent.
After cleaning it is very important to check that the burner flame distributor
F
and the cap
C
are correctly repositioned. Also check the electrode
S
& Thermocouple are clean to
ensure trouble-free sparking.
Stainless steel can be stained if it’s in contact with highly calcareous water or aggressive
detergents(containing phosphorous). It is recommended these parts be cleaned with water
and then dried well.
TRIPLE RING BURNER
The triple ring burner must be correctly positioned (seen fig.7); the burner rib must be
entering in their ligament as shown by the arrow. The burner correctly positioned must not
11
