8
CONNECT THE COOKTOP TO GAS
Shut off the main gas supply valve before disconnecting the old cooktop and leave it off until
the new hook-up has been completed. Don’t forget to relight the pilot on other gas appliances
when you turn the gas back on.
Never use an old connector when installing a new cooktop.
CONVERTING TO LP GAS (or converting to natural gas from LP)
This cooktop leaves the factory set for use with natural gas or LP gas. Please read carefully in the
rating label information to confirm this.
PROVIDE ADEQUATE GAS SUPPLY
Your LPG/Propane cooktop is designed to operate at a pressure 10” of Water
Column(2490 Pa +/- 4%)).
Your NG cooktop is designed to operate at pressure 5”.
Make sure you are supplying your cooktop with the type of gas for which it’s designed.
This cooktop is convertible for use on nature or propane gas. If you decide to use this
cooktop on opposite gas type, conversion must be conducted by a qualified LP installer
before attempting to turn on the gas supply.
When checking for proper operation of this regulator, the inlet pressure must be at least 1”
greater than the operating pressure as given above.
A flexible metal appliance connector used to connect the cooktop to the gas supply line
should have an I.D. of 1/2” and be 2~5 feet in length for ease of installation. In Canada,
flexible connectors must be single wall metal connectors no longer than 6 feet in length.
