SAVING PRESETS
(continued)
Saving presets to memory can be done at any time, even when Kismet is currently set to a memory
or is in expression mode. Because of that, the knob positions may not match the actual, internal
settings. It is the actual settings that are saved, i.e., what you hear is what you save. Settings are
saved to EEPROM type memory and are not lost when power is disconnected.
USING PRESETS
When Kismet recalls a preset memory position, its internal settings change and the physical knob
positions will likely not match. While set to a preset, it is still possible to change any setting by
turning its knob. That setting will be “released” from memory and changed to match the knob
position. If all five knobs are changed, Kismet will be in LIVE SETTINGS mode.
THREE WAYS TO CHANGE PRESETS
1.
The center toggle switch will advance to the next memory position every time it is tapped to
the right, or to the previous memory position every time it is tapped to the left.
The left toggle switch, TOGGLE/CYCLE, sets the function of the left footswitch, TOGGLE/CYCLE.
2.
Set to CYCLE, the footswitch will advance to the next memory position every time.
3.
Set to TOGGLE, the footswitch will change back and forth between two memory positions.
LIVE SETTINGS can be thought of as a fifth memory position that matches the current knob
positions. It is reached by selecting the next memory after memory four, or the previous memory
before memory one. It can also be reached by holding the TOGGLE/CYCLE footswitch.
THREE WAYS TO CHANGE PRESETS (continued)
1
2
3
4
LIVE SETTINGS
1
2
3
4
1
2
3
4
Fig. 5
Three ways to change presets.
7
8
NOTE:
Tapping the
center toggle is an easy
way to select which two
memories are toggled.
NEXT
or
PREVIOUS
1
NEXT
2
BACK
&
FORTH
3
TAP
LEFT
TAP
RIGHT
