RAM TRUCK 1500 2010, User Manual, Page: 15 / 96

WARNING!
• Actuating the recliner handle will allow the seatback to swing (dump) forward on
manual recliner seats. Do not stand or lean in front of the seat while actuating the
handle. The seatback may swing forward and hit you causing injury. This dump
feature allows access to the storage bin behind the seat. To avoid injury, place your
hand on the seatback and actuate the handle, then position the seatback in the
desired position.
• Do not ride with the seatback reclined so that the seat belt is no longer resting
against your chest. In a collision, you could slide under the seat belt and be
seriously or even fatally injured. Use the recliner only when the vehicle is parked.
Eight-Way Driver Power Seat
• The seat switch controls forward/backward and up/down.
• The seatback switch controls the angle of the seatback. Push switch forward or
rearward and the seatback will move in either direction.
CAUTION!
DO NOT place any article under a power seat or impede its ability to move as it may
cause damage to the seat controls. Seat travel may become limited if movement is
stopped by an obstruction in the seat’s path.
Power Lumbar
• The lumbar controls are located on the
outboard side of the seat cushion. The
lumbar support can be increased by
pressing the front of the switch and
decreased by pressing the back of the
switch.
Memory Seats
• The memory seat feature allows you to save the driver's seat position, driver's outside
mirror position, adjustable brake and accelerator pedals, Automatic Temperature
Control (ATC) temperature setting and radio station preset settings. The driver's
memory buttons are located on the outboard side of the driver's seat cushion.
• Adjust all memory profile settings, press the SET button, then press 1 or 2 within five
seconds.
• To program a Key Fob to the memory position, place the ignition switch in the OFF
position and press and release the LOCK button within 10 seconds on the Key Fob to
be programmed.
• Press 1 or 2 to recall the saved positions, or press UNLOCK on the programmed Key Fob.
• Refer to the Owner's Manual on the DVD for further details.
13
GETTING STARTED