Home
/
RAM
/
Ram Dodge 2009
/
Owner'S Manual

RAM Ram Dodge 2009, Owner'S Manual, Page: 424 / 543

Share

Page: 424 / 543

RAM Ram Dodge 2009 Owner'S Manual Download Page 424

Remove the jack and tools by removing the wing bolt and
sliding the assembly from under the seat.

WARNING!

After using the jack and tools, always reinstall them
in the original carrier and location. While driving
you may experience abrupt stopping, rapid accelera-
tion or sharp turns. A loose jack, tools, bracket or
other objects in the vehicle may move around with
force, resulting in serious injury.

Reinstalling The Jack And Tools

1. Lower the jack all the way down by turning the jack
turn-screw until the jack is snug.

Jack and Tools

422

WHAT TO DO IN EMERGENCIES

«
...
422
423
424
425
426
...
»

Summary of Contents for Ram Dodge 2009
































































































































































































































































































































































































































































































































































Reviews:

No comments