RAM RAM CV Cargo Van 2012, Owner'S Manual

Page: 376 / 642

•
When both switches are on Channel 2, the Remote is
controlling Channel 2 and the headphones are tuned
to the audio of the VES™ Channel 2.
2. Press the MODE button on the remote control.
3. If the video screen is displaying a video source (such
as a DVD Video), pressing STATUS shows the status on a
popup banner at the bottom of the screen. Pressing the
MODE button will advance to the next mode. When the
mode is in an audio only source (such as FM), the Mode
Selection menu appears on screen.
4. When the Mode Selection menu appears on screen,
use the cursor buttons on the remote control to navigate
to the available modes and press the ENTER button to
select the new mode.
5. To cancel out of the Mode Selection menu, press the
BACK button on the remote control.
Replacing The Headphone Batteries
Each set of headphones requires two AAA batteries for
operation. To replace the batteries:
•
Locate the battery compartment on the left ear cup of
the headphones, and then slide the battery cover
downward.
•
Replace the batteries, making sure to orient them
according to the polarity diagram shown.
•
Replace the battery compartment cover.
Unwired
姞
Stereo Headphone Lifetime Limited
Warranty
Who Does This Warranty Cover?
This warranty covers
the initial user or purchaser (
⬙
you
⬙
or
⬙
your
⬙
) of this
particular Unwired Technology LLC (
⬙
Unwired
⬙
) wire-
less headphone (
⬙
Product
⬙
). The warranty is not transfer-
able.
374 UNDERSTANDING YOUR INSTRUMENT PANEL