RAM Ram 1500 2012, User Manual

Page: 19 / 156

Memory Seat
• The memory seat feature allows you
to save the driver's seat position
(excluding lumbar position), driver's
outside mirror position, adjustable
brake and accelerator pedals,
Automatic Temperature Control (ATC)
temperature setting and radio station
preset settings. The driver's memory
buttons are located on the outboard
side of the driver's seat cushion.
• Adjust all memory profile settings, press the SET button, then press 1 or 2
within five seconds.
• To program a Key Fob to the memory position, place the ignition switch in the
LOCK position and remove the Key Fob, press and release the LOCK button
on the Key Fob to be programmed within 5 seconds of pressing button 1 or 2.
• Press 1 or 2 to recall the saved positions, or press UNLOCK on the
programmed Key Fob.
• Refer to the Owner's Manual on the DVD for further details.
Manual Seats
Forward/Rearward
• Lift up on the adjusting bar located
at the front of the seat near the floor
and release at the desired position,
then release the handle to lock the
seat into position.
Recliner
• Lift the recliner lever located on the
outboard side of the seat, lean back
and release at the desired position.
CAUTION!
Do not place any article under a power seat or impede its ability to move as it
may cause damage to the seat controls. Seat travel may become limited if
movement is stopped by an obstruction in the seat’s path.
GETTING STARTED
17