RAM PROMASTER CITY2018, Owner'S Manual

Page: 83 / 347

Exit Menu
This is the last function that closes the cycle of settings
listed in the menu screen.
1. Pushing the
MENU
button briefly will return the dis-
play to the standard screen without storing.
2. Push the down arrow button to return to the first menu
item on the display.
TRIP COMPUTER
The Trip Computer is located in the instrument cluster. It
features a driver-interactive display (displays information
such as trip information, range, fuel consumption, average
speed, and travel time).
Trip Button
The
TRIP
button, located on the right steering column
stalk, can be used to display and to reset the previously
described values.
•
A short button push displays the different values.
•
A long button push resets the system and then starts a
new trip.
New Trip
To reset:
•
Push and hold the TRIP button to reset the system
manually.
•
When the “Trip distance” reaches 99999.9 miles or
kilometers or when the “Travel time” reaches 999.59 (999
hours and 59 minutes), the system is reset automatically.
•
Disconnecting/Reconnecting the battery resets the sys-
tem.
NOTE: If the reset operation occurs in the presence of the
screens concerning Trip A or Trip B, only the information
associated with Trip A or Trip B functions will be reset.
Start Of Trip Procedure
With the ignition on, push and hold the TRIP button for
over two seconds to reset trip information.
Exit Trip
1. To exit the Trip function, wait until all the values have
been displayed or hold the MENU button for longer
than one second.
4
GETTING TO KNOW YOUR INSTRUMENT PANEL 81