RAM PROMASTER CITY2018, Owner'S Manual

Page: 79 / 347

2. If the function is on, push and release the up or down
arrow button to select the required speed limit and then
push
MENU to confirm.
NOTE: The speed may be set in the range from 20 to 125
MPH (30 to 200 km/h) according to the previously chosen
unit.
The setting will increase/decrease by five units each time
the
up or down arrow button is pushed. Hold down the up
or down arrow button to automatically increase/decrease
the setting rapidly. Complete the adjustment when you
approach the desired value.
Push the MENU button briefly to return to the menu
screen or hold the MENU button down to return to the
standard screen without storing.
To cancel the setting:
1. Briefly push the MENU button. “ON” will flash in the
display.
2. Push the down arrow button. “OFF” will flash in the
display.
3. Push the MENU button briefly to return to the menu
screen or hold the MENU button down to return to the
standard screen without storing.
Trip B Data
This function can be used to activate (On) or deactivate
(Off) the Trip B display (Partial Trip).
Refer to
⬙
Trip Computer
⬙
in this section for further infor-
mation.
To switch the function On/Off:
1. Push the MENU button briefly. The display will flash
On or Off according to the previous setting.
2. Push and release the up or down arrow button to select.
Push the MENU button briefly to return to the menu
screen or hold the MENU button down to return to the
standard screen without storing.
Set Time
With this function, it is possible to set the time through two
submenus:
⬙
Time
⬙
and
⬙
Mode
⬙
.
To set the time:
1. Push the MENU button; the display will show the two
submenus “Time” and “Mode”.
2. Push and release the up or down arrow button to switch
between the two submenus.
4
GETTING TO KNOW YOUR INSTRUMENT PANEL 77