RAM PROMASTER CITY Owner'S Manual Download

Page: 181 / 280

SAFETY

179

installing a child restraint using the LATCH

system, buckle the seat belt behind the child

restraint and out of the child’s reach. If the

buckled seat belt interferes with the child

restraint installation, instead of buckling it

behind the child restraint, route the seat belt

through the child restraint belt path and then

buckle it. Do not lock the seat belt. Remind all

children in the vehicle that the seat belts are not

toys and that they should not play with them.

Installing Child Restraints Using The Vehicle

Seat Belt In Vehicles With Rear Seating

Child restraint systems are designed to be

secured in vehicle seats by lap belts or the lap

belt portion of a lap/shoulder belt.

The seat belts in the passenger seating

positions are equipped with a Switchable

Automatic Locking Retractor (ALR) that is

designed to keep the lap portion of the seat belt

tight around the child restraint so that it is not

necessary to use a locking clip. The ALR

retractor can be “switched” into a locked mode

by pulling all of the webbing out of the retractor

and then letting the webbing retract back into

the retractor. If it is locked, the ALR will make a

clicking noise while the webbing is pulled back

into the retractor

page 159.

Lap/Shoulder Belt Systems For Installing

Child Restraints In This Vehicle

Automatic Locking Retractor (ALR) Locations — Vehi

cle With Rear Seating

WARNING!



Improper installation of a child restraint to

the LATCH anchorages can lead to failure of

the restraint. The child could be badly

injured or killed. Follow the child restraint

manufacturer’s directions exactly when

installing an infant or child restraint.



Child restraint anchorages are designed to

withstand only those loads imposed by

correctly-fitted child restraints. Under no

circumstances are they to be used for adult

seat belts, harnesses, or for attaching other

items or equipment to the vehicle.

WARNING!



Improper installation or failure to properly

secure a child restraint can lead to failure

of the restraint. The child could be badly

injured or killed.



Follow the child restraint manufacturer’s

directions exactly when installing an infant

or child restraint.

ALR — Switchable Automatic Locking Retractor

Top Tether Anchorage Symbol

21_VM_OM_EN_USC_t.book Page 179

Summary of Contents for PROMASTER CITY

























































































































































































































































































Search results

Summary of Contents for PROMASTER CITY

Reviews:

Related manuals for PROMASTER CITY

Brands by name

Popular brands

RAM PROMASTER CITY, Owner'S Manual

Search results

Summary of Contents for PROMASTER CITY

Reviews:

Related manuals for PROMASTER CITY

Brands by name

Popular brands