WEB INTERFACE - next -
G/ SNMP configuration
Doawnload CSS404 MIB file.
SNMP Access:
configure multiple community
names if you want the SNMP agent to respond
to the NMS/SNMP with different read and
write community names. If less than three
communities are needed, leave extra fields
blank do disable them.
SNMP trap destination:
define target destinations A
and B for sending SNMP traps.
specifies if the trap use
V2c
inform or V2c
Type:
format.
specifies a maximum number of
Number of Retries:
times to resend an inform request
specifies a number of seconds to wait
Timeout(sec):
for an acknowledgment before resending
Community:
textual name of the group for SNMP
trap being sent.
IP adress:
destiation adress where the SNMP trap will
be sent.
Enable:
Enables transmission of SNMP traps to this
destination.
MIB II system group:
user-defined settings in the standard SNMP header.
SysContact:
The contact person for this managed device.
SysName:
An administratively-assigned name for this managed device.
SysLocation:
Location of the unit.
32
RAMI
CSS404
