Rear Head Restraints
The rear seats are equipped with adjustable and
removable head restraints. To raise the head restraint,
pull upward on the head restraint. To lower the head
restraint, push the adjustment button located on the
base of the head restraint and push downward on the
head restraint.
NOTE:
•
The rear center head restraint (Crew Cab) has only
one adjustment position that is used to aid in the
routing of a tether
•
Do not reposition the head restraint 180 degrees to
the incorrect position in an attempt to gain addi-
tional clearance to the back of the head.
Rear Head Restraint Removal
To remove the head restraint, push the adjustment but-
ton and the release button while pulling upward on the
whole assembly. To reinstall the head restraint, put the
head restraint posts into the holes and adjust it to the
appropriate height.
NOTE:
To remove outboard restraints, the rear seat bottom
must be folded up.
WARNING!
•
A loose head restraint thrown forward in a collision
or hard stop could cause serious injury or death to
occupants of the vehicle. Always securely stow
removed head restraints in a location outside the
occupant compartment.
•
ALL the head restraints MUST be reinstalled in the
vehicle to properly protect the occupants. Follow
the reinstallation instructions prior to operating the
vehicle or occupying a seat.
DRIVER ADJUSTABLE PEDALS —
IF EQUIPPED
The adjustable pedals system is designed to allow a
greater range of driver comfort for steering wheel tilt
and seat position. This feature allows the brake and
accelerator pedals to move toward or away from the
driver to provide improved position with the steering
wheel.
The adjustable pedal switch is located to the left side of
the steering column.
The pedals can be adjusted with the ignition in the OFF
position.
The pedals
cannot
be adjusted when the vehicle is in
REVERSE or when the Cruise Control system is on. If
there is an attempt to adjust the pedals when the sys-
tem is locked out, one of the following messages will
appear (on vehicles equipped with an instrument clus-
ter display):
•
Adjustable Pedal Disabled — Cruise Control Engaged
•
Adjustable Pedal Disabled — Vehicle In Reverse
NOTE:
•
Always adjust the pedals to a position that allows
full movement of the pedal.
•
Further small adjustments may be necessary to find
the best possible seat/pedal position.
•
For vehicles equipped with Driver Memory Settings,
you can use your remote keyless entry key fob or the
memory switch on the driver’s door trim panel to
return the adjustable pedals to saved positions
Release/Adjustment Buttons
1 — Release Button
2 — Adjustment Button
Adjustable Pedals Switch
GETTING TO KNOW YOUR VEHICLE
33
2
Summary of Contents for CHASSIS CAB 2024
