RAM Cargo Van 2014 Owner'S Manual Download Page 184

Page: 184 / 666

6. Push the seat into the storage bin.

7. Close the storage bin cover.

CAUTION!

The storage bin cover must be locked and flat to
avoid damage from contact with the front seat tracks,
which have minimal clearance to the cover.

WARNING!

In a collision, serious injury could result if the seat
storage bin covers are not properly latched.

•

Do not drive the vehicle with the storage bin covers
open.

•

Keep the storage bin covers closed and latched
while the vehicle is in motion.

•

Do not use a storage bin latch as a tie down.

Seat In Storage Bin

182

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for Cargo Van 2014



























































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Cargo Van 2014

Reviews:

Related manuals for Cargo Van 2014

Brands by name

Popular brands

RAM Cargo Van 2014, Owner'S Manual

Search results

Summary of Contents for Cargo Van 2014

Reviews:

Related manuals for Cargo Van 2014

Brands by name

Popular brands