The AUF200 includes two stereophonic balanced A and B channels mixed toward a balanced output.
All transitions from one channel to another are performed by an electronic mixing (fade in/out),
which parameters are modifiable. Transitions can be done either by the presence of modulation, or by
closing an outside loop, or with a combination of both.
For three channels mixing, use AUF 300
Input/output interfacing:
“Opto” input
Relay output showing commutation state.
Mirror relay output on the input remote control
The latest generation conception plus no-compromise choice of the most recent components
guarantee maximum reliability to our products, making them ideal for professional Broadcast or
recording studios configurations
Four running choices by internal switch programmable. External Sub-D programming possible too.
Automatic:
modulation on channel B automatically open this channel and disconnect the
other one.
Manual :
switching from channel A to channel B by external remote control.
Return to channel A by loop opening.
Automatic or manual:
Only one of those previous conditions has to be fulfilled
Automatic and manual:
Both previous conditions have to be satisfied (modulation on channel B plus
closing of the external loop needed).
Insertion of advertisements downstream some mixing decks.
Mixing of advertisements and identification jingles with a unidentified musical program.
Local program remote insertion on a national program
Supervision of the audio modulation presence and in case of absence, management of
replacement and automatic back-up.
The AUF is implemented with top quality, extremely well protected output amplifiers which can be
used as specialized, long distance shielded or coaxial lines drivers.
The very high bandwidth allows AUF use on multiplex FM signals.
The very high bandwidth allows AUF to handle multiplex FM signal.
DESCRIPTION
USES
RAMI
AUF200S
14
Summary of Contents for AUF200
Page 2: ...RAMI AUF200S 2...
Page 12: ...RAMI AUF200S 12...
