Attach the Truck Bed Hinges
1. Carefully turn the truck bed
upside down.
2. Orient each hinge so the hinge
tube is facing towards the
center of the truck bed and
the hinge is on the outside.
3 Align the posts on the
underside of the truck bed
with the holes on the bottom
of the hinge.
4. Insert the three screws into
the holes on the hinge, and
tighten the screws. Repeat
for second hinge.
Attach the Truck Bed to the
Truck Body
5. Insert the two square, metal
tubes from the hinges into
the two square tubes located
on the back of the rear axle.
6. Push the two metal tubes
into each other until the pins
in the axle tube insert into
the holes on the hinges.
You should hear a click sound
that confirms the square tubes
are completely connected.
Tip!
Click
The middle screw can be
difficult to attach. It may
be easier to first insert each
screw into the openings on
the hinge before placing the
hinge assembly on the body.
Tip!
6
2
4
5
1
6
3
4
3
2
