IN CASE OF EMERGENCY
200
(Continued)
Jack Location
The jack and jack tools are stored under the
front passenger seat.
Removal Of Jack And Tools
To access the jack and jack tools, you must
remove the plastic access cover located on
the side of the front passenger’s seat. To
remove the cover, pull the front part of the
cover (closest to the front of the seat) toward
you to release a locking tab. Once the front
of the cover is loose, slide the cover toward
the front of the seat until it is free from the
seat frame.
Jack Access Cover
Remove the jack and tools by turning the
wing bolt counterclockwise, remove the wing
bolt and then slide the assembly out from
under the seat.
Wing Bolt/Jack And Tools
Remove the jack and tools from the bracket
assembly. Turn the jack-turn-screw counter
-
clockwise to release jack from bracket
assembly.
Jack And Tools Bracket Assembly
There are two ways to assemble the tools:
Assembled For Spare Tire Lowering/Raising
Assembled For Spare Tire Lowering/Raising
1 — Lug Wrench
2 — Extension 2
3 — Extension 3
4 — Extension 4
CAUTION!
The lug wrench can only be attached to
extension 2.
When attaching the tool to the winch
mechanism be sure the large flared end
opening on extension 4 is positioned
correctly over the winch mechanism
adjusting nut.
2019_RAM_2500_3500_UG_USA=GUID-8BBFE451-BF24-4E82-808A-AE2460D39A05=1=en=.book Page 200
Summary of Contents for 2500 2019
Page 1: ...2019 USER GUIDE RAM 2500 3500...
Page 330: ......
