RAM 2015 1500 Owner'S Manual Download Page 602

Page: 602 / 871

EXAMPLE:

Load Identification:

Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL)

tire:

•

= Extra load (or reinforced) tire, or

•

= Light load tire or

•

C, D, E, F, G

= Load range associated with the maximum load a tire can carry at a specified pressure

Maximum Load

– Maximum load indicates the maximum load this tire is designed to carry

Maximum Pressure

– Maximum pressure indicates the maximum permissible cold tire inflation pressure for this

tire

Tire Identification Number (TIN)

The TIN may be found on one or both sides of the tire,

however, the date code may only be on one side. Tires

with white sidewalls will have the full TIN, including the

date code, located on the white sidewall side of the tire.

Look for the TIN on the outboard side of black sidewall

tires as mounted on the vehicle. If the TIN is not found on

the outboard side, then you will find it on the inboard

side of the tire.

600

STARTING AND OPERATING

Summary of Contents for 2015 1500








































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 2015 1500

Reviews:

RAM 2015 1500, Owner'S Manual, Page: 602 / 871

Search results

Summary of Contents for 2015 1500

Reviews: