NOTE:
•
During engine shut down on vehicles equipped with
manual transmissions, it is normal for the diesel en-
gine to resonate heavily for a moment during engine
shut off. When the engine is connected to a manual
transmission, this resonance causes load gear rattle
from the transmission. This is commonly referred to as
“shut down rattle.” The manufacturer recommends
performing engine shut down with the clutch pedal
pushed to the floor (clutch disengaged). When engine
shut down is performed in this manner the rattle is
reduced (not eliminated).
•
Refer to the following chart for proper engine shut-
down.
Driving
Condition
Load
Turbo-
charger
Tempera-
ture
Idle Time
(min.)
Before
Engine
Shutdown
Stop and
Go
Empty
Cool
Less than
One
Stop and
Go
Medium
One
Highway
Speeds
Medium
Warm
Two
City Traffic
Maximum
GCWR
Three
Highway
Speeds
Maximum
GCWR
Four
Uphill
Grade
Maximum
GCWR
Hot
Five
4
STARTING AND OPERATING 213
Summary of Contents for 2014 5500
