RAM 2012 Truck Chassis cab, Owner'S Manual, Page: 289 / 506

CAUTION!
•
Before moving the shift lever out of PARK, you
must turn the ignition switch from the LOCK/OFF
position to the ON/RUN position, and also press
the brake pedal. Otherwise, damage to the shift
lever could result.
•
DO NOT race the engine when shifting from
PARK or NEUTRAL into another gear range, as
this can damage the drivetrain.
The following indicators should be used to ensure that
you have engaged the shift lever into the PARK position:
•
When shifting into PARK, pull the shift lever toward
you and move it all the way counterclockwise until it
stops.
•
Release the shift lever and make sure it is fully seated
in the PARK gate.
•
Look at the shift lever position display and verify that
it indicates the PARK position.
•
With brake pedal released, verify that the shift lever
will not move out of PARK.
REVERSE
This range is for moving the vehicle rearward. Use this
range only after the vehicle has come to a complete stop.
NEUTRAL
Use this range when the vehicle is standing for prolonged
periods with the engine running. The engine may be
started in this range. Set the parking brake and shift the
transmission into PARK if you must leave the vehicle.
5
STARTING AND OPERATING 287