RAM 2011 Ram Truck Chassis Cab, Owner'S Manual, Page: 247 / 494

This feature allows an iPod
威
to be plugged into the
vehicle’s sound system through a 16–pin connector, using
the provided interface cable.
iPod
威
control supports Mini, 4G, Photo, Nano, 5G iPod
威
and iPhone
威
devices. Some iPod
威
software versions may
not fully support the iPod
威
control features. Please visit
Apple’s website for software updates.
NOTE:
•
If the radio has a USB port, refer to the appropriate
Uconnect Multimedia radio user’s manual for iPod or
external USB device support capability.
•
Connecting an iPod
威
to the AUX port located in the
radio faceplate, plays media, but does not use the
iPod
威
control feature to control the connected device.
Connecting The iPod
姞
Use the provided connection cable to connect an iPod
威
to
the vehicle’s 16–pin connector port (which is located in
the glove compartment on some vehicles). Once the
iPod
威
is connected and synchronized to the vehicle’s
iPod
威
control system (iPod
威
may take a few seconds to
connect), the iPod
威
starts charging and is ready for use
by pressing radio switches, as described below.
NOTE:
•
It may be necessary to remove the connector pin
protection cap from the 16–pin connector port, prior to
connecting the cable.
•
If the iPod
威
battery is completely discharged, it may
not communicate with the iPod
威
control system until
a minimum charge is attained. Leaving the iPod
威
connected to the iPod
威
control system may charge it to
the required level.
Using This Feature
By using the provided connection cable to connect an
iPod
威
to the vehicle’s iPod
威
control 16–pin connector
port:
4
UNDERSTANDING YOUR INSTRUMENT PANEL 245