RAM 1500 2023 Page 98 Owner'S Manual Download

Page: 98 / 416

GETTING TO KNOW YOUR INSTRUMENT PANEL

IGHLINE

NSTRUMENT

LUSTER

ESCRIPTIONS

— G

ASOLINE

1. Tachometer



Indicates the engine speed in revolutions per

minute (RPM x 1000).

2. Instrument Cluster Display



When the appropriate conditions exist, this display

shows the instrument cluster display messages

page 98.



The display always shows one of the main menu

items after ignition on.

3. Speedometer



Indicates vehicle speed.

4. Temperature Gauge



The pointer shows engine coolant temperature.

The pointer positioned within the normal range

indicates that the engine cooling system is oper

ating satisfactorily.



The pointer will likely indicate a higher tempera

ture when driving in hot weather, up mountain

grades, or when towing a trailer. It should not be

allowed to exceed the upper limits of the normal

operating range.

5. Fuel Gauge



The pointer shows the level of fuel in the fuel tank

when the ignition is in the ON/RUN position.



The fuel pump symbol points to the

side of the vehicle where the fuel door

is located.

WARNING!

A hot engine cooling system is dangerous. You or others

could be badly burned by steam or boiling coolant. You

may want to call an authorized dealer for service if your

vehicle overheats

page 350.

CAUTION!

Driving with a hot engine cooling system could damage

your vehicle. If the temperature gauge reads “H,” pull

over and stop the vehicle. Idle the vehicle with the air

conditioner turned off until the pointer drops back into

the normal range. If the pointer remains on the “H,”

turn the engine off immediately and call an authorized

dealer for service.

23_DT_OM_EN_USC_t.book Page 96

Summary of Contents for 1500 2023

































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2023

Reviews:

Related manuals for 1500 2023

Brands by name

Popular brands

RAM 1500 2023, Owner'S Manual

Search results

Summary of Contents for 1500 2023

Reviews:

Related manuals for 1500 2023

Brands by name

Popular brands