RAM 1500 2023 Page 41 Owner'S Manual Download

Page: 41 / 416

GETTING TO KNOW YOUR VEHICLE

The Automatic Dimming feature can be turned on or off

through the touchscreen.

Automatic Dimming Mirror

Digital Rearview Mirror — If Equipped

The Digital Rearview Mirror provides a high definition,

wide and unobstructed view of the road behind while

driving.
Position the mirror in the regular Automatic Dimming

Mirror mode, then activate the Digital Rearview Mirror

mode.
To activate the Digital Rearview Mirror, pull the on/off

control lever on the bottom of the mirror rearward toward

the driver.

Digital Rearview Mirror

Push the menu button next to the on/off control/toggle to

access the following mirror options:



Brightness



Tilt

Use the left and right buttons to scroll through menu

options.
When not in use, push the on/off forward toward the

windshield to return the mirror to the regular Automatic

Dimming Mirror.

NOTE:

The Digital Rearview Mirror is not as effective during

nighttime driving in low light applications due to low

ambient light levels. In the event that it provides the user

with less than expected vision, the mirror can be reverted

to a normal reflective Automatic Dimming Mirror by

pushing the control/toggle forward in the vehicle and

putting the mirror into Automatic Dimming Mirror mode.

LLUMINATED

ANITY

IRROR

To access an illuminated vanity mirror, flip down one of the

visors and lift the cover.

Lift Cover For Illuminated Mirror

CAUTION!

To avoid damage to the mirror during cleaning, never

spray any cleaning solution directly onto the mirror.

Apply the solution onto a clean cloth and wipe the

mirror clean.

1 — On/Off Control/Toggle
2 — Menu Button
3 — Left Scroll Button
4 — Right Scroll Button

23_DT_OM_EN_USC_t.book Page 39

Summary of Contents for 1500 2023

































































































































































































































































































































































































































Search results

Summary of Contents for 1500 2023

Reviews:

Related manuals for 1500 2023

Brands by name

Popular brands

RAM 1500 2023, Owner'S Manual

Search results

Summary of Contents for 1500 2023

Reviews:

Related manuals for 1500 2023

Brands by name

Popular brands