RAM 1500 2019, User Manual

Page: 19 / 340

To Disarm The System
The vehicle security alarm can be disarmed
using any of the following methods:
1. Push the unlock button on the key fob.
2. Grasp the Passive Entry Unlock Door
Handle with a valid key fob within 5 ft
(1.5 m) of the passive entry door handle.
If equipped, refer to "Keyless Enter-N-Go
— Passive Entry" in "Getting To Know Your
Vehicle" for further information.
3. Place the ignition out of the “OFF” position.
The vehicle security alarm is designed to
protect your vehicle. However, you can create
conditions where the system will give you a
false alarm. If one of the previously described
arming sequences has occurred, the vehicle
security alarm will arm regardless of whether
you are in the vehicle or not. If you remain in
the vehicle and open a door, the alarm will
sound. If this occurs, disarm the vehicle
security alarm.
If the vehicle security alarm is armed and the
battery becomes disconnected, the vehicle
security alarm will remain armed when the
battery is reconnected; the exterior lights will
flash, and the horn will sound. If this occurs,
disarm the vehicle security alarm.
Rearming Of The System
If something triggers the alarm, and no action
is taken to disarm it, the vehicle security
alarm will turn the horn off after 29 seconds,
5 seconds between cycles, up to 8 cycles if
the trigger remains active and then the ve-
hicle security alarm will rearm itself.
DOORS
Power Side Steps — If Equipped
The Power Side Steps will extend a step for
easier entry and exit of the vehicle.
When configured for “Automatic” mode, the
Power Side Steps will deploy when either the
driver’s or passenger’s side door is opened, or
when the deploy setting is activated through
the touchscreen. When configured for “Stow”
mode, the steps will stay in their position but
can also be deployed manually through the
radio.
If the vehicle speed exceeds 5 mph (8 km/h),
or if the retract setting is selected in the
touchscreen, the steps will retract.
Refer to “Uconnect Settings” in “Multime-
dia” in the Owner’s Manual for additional
information.
Keyless Enter-N-Go — Passive
Entry
The Passive Entry system is an enhancement
to the vehicle’s Remote Keyless Entry system
and a feature of Keyless Enter-N-Go. This
feature allows you to lock and unlock the
vehicle’s door(s) without having to push the
key fob lock or unlock buttons.
NOTE:
• Refer to “Uconnect Settings” in “Multime-
dia” in the Owner’s Manual for further in-
formation.
17