RAM Commercial RAM PROMASTER, Quick Reference Manual

Page: 5 / 16

Lumbar Support — If Equipped
This feature allows you to increase or decrease
the amount of lumbar support. The lumbar con-
trol knob is located on the rear upper outboard
side of the driver's seatback. Rotate the control
forward to increase and rearward to decrease the
desired amount of lumbar support.
Height Adjustment (Without Swivel Seat) —
If Equipped
The height adjusting levers are located on the
center outboard side of the seat. Lift the front
lever with little or no weight applied to the seat,
to raise the front on the seat. Lift the front lever
with weight applied to the seat to lower it.
Follow these instructions for the rear lever to
adjust the rear of the seat.
Height Adjustment (With Swivel Seat) —
If Equipped
The height adjusting knobs are located on the
center outboard side of the seat. Rotate the
front knob to adjust the front of the seat up or
down. Rotate the rear knob to adjust the rear of
the seat up or down.
Recliner Adjustment
The recliner knob is on the rear outboard side of
the seat. To recline the seatback, lean back,
rotate the knob rearward to position the seat-
back as desired. To return the seatback to its
normal upright position, lean forward, rotate
the knob forward until the seatback is in the
upright position.
Heated Seats — If Equipped
On some models, the front driver and passenger
seats may be equipped with heaters in both the
seat cushions and seatbacks. The controls for
the front heated seats are located on the lower
outboard side of the seat.
To Turn Heated Seats On/Off
1. Push the switch once to turn on the heated
seats.
2. Push the switch a second time to shut the
heating elements off.
Heated Seat Switch