
•
Vehicle is not in a tight curve
•
Driver has hands on steering wheel
NOTE:
•
The driver should always obey traffic laws and
speed limits. Never drive above applicable speed
limit restrictions.
•
The driver can override ADA at any time by braking,
accelerating, or steering the vehicle.
•
For the system to detect the driver’s hands on the
steering wheel, the wheel must be gripped on the
outside. Gripping the inside areas of the steering
wheel will not satisfy the hands-on condition to
engage the system.
System Deactivation
The system will be deactivated in any of the following
situations:
•
If the system has detected driver inattentiveness,
and has gone through all escalation warnings after
hands are no longer detected on the steering wheel
•
If lane markings are no longer detected
•
If the brake pedal is pressed or ACC system is
deactivated
•
If the Active Driving Assist on/off button is pushed
again (ADA will turn off)
•
If a turn signal is used (unless a target is in the blind
spot zone on the same side the turn signal is being
applied)
•
If the driver applies enough input to the steering
wheel
•
If the driver’s seat belt is released
•
If the vehicle speed exceeds 93 mph (150 km/h)
•
If the Forward Collision Warning (FCW) system
becomes active and is providing warnings/braking
•
Pushing the Active Driving Assist on/off button will
turn the system off. All other deactivation conditions
will place the system back into the “enabled” state
with the steering wheel indicator displayed in white
until all engagement conditions are met again.
•
When the system is deactivated, the system status
indicator lights will turn off, Active Lane Manage-
ment will return to its previous state, and ACC will
disable.
INDICATIONS ON THE DISPLAY
The Active Driving Assist system status can always be
viewed in the instrument cluster display, and status
changes are shown by changes in color of the system’s
indicator lights.
As the system detects driver inattentiveness as previ-
ously described
page 107, the system status indi-
cator lights will change from green, to yellow, to red,
while the steering wheel icon on the display moves up
the screen to the center. The following indicators will
change in color as warnings to the driver escalate:
•
Active Driving Assist Indicator (steering wheel icon in
the instrument cluster display)
•
Glow effect of the instrument cluster display
If driver attention is not returned, the system will
deactivate.
Active Driving Assist Indicators Are Off
•
ADA is not turned on/enabled by the driver.
Active Driving Assist Indicators Are White
•
ADA is turned on/enabled by the driver, but the sys-
tem is not actively providing steering to the vehicle.
Active Driving Assist Indicators Are Green
•
The system detects driver is attentive and is actively
steering the vehicle.
Active Driving Assist Indicators Are Yellow
•
Driver inattentiveness has been detected, warning
the driver to place hands on the steering wheel.
Active Driving Assist Indicators Are Red
•
Driver inattentiveness is still being detected,
warning the driver to place hands on the steering
wheel. This warning is also issued when the system
has detected a tight curve and is warning the driver
to take control
NOTE:
The driver
MUST
replace hands on the steering wheel
and take control of the vehicle when the system is
deactivated.
Do Not Grip Inside Of Steering Wheel
STARTING AND OPERATING
109
4
Summary of Contents for ProMaster 2024
Page 66: ...GETTING TO KNOW YOUR INSTRUMENT PANEL BASE MIDLINE INSTRUMENT CLUSTER 64...
Page 68: ...PREMIUM INSTRUMENT CLUSTER 66 GETTING TO KNOW YOUR INSTRUMENT PANEL...
Page 281: ......
Page 282: ......