RAM Commercial PROMASTER 2020 Owner'S Manual Download Page 238

Page: 238 / 260

236

MULTIMEDIA

USB Charging Port

The USB connector port can be used for

charging purposes only. Use the connection

cable to connect an iPod® or external USB

device to the vehicle's USB charging port which

is located next to the 12V power outlet near the

cup holder on the passenger side.

Passenger Compartment USB Charging Port

NOTE:

If the device battery to be charged is completely

depleted, it may take awhile to charge.

RAM TELEMATICS - IF EQUIPPED

Ram Telematics is designed to help improve

safety, efficiency, and productivity. It gives you

complete visibility of your fleet options, whether

from behind a desk or on a mobile device while

you are on the go. You can log-in to view near

real-time and historical activity, including

location, vehicle heath, and driver performance.
Activating Ram Telematics In Your Vehicles
Before you get started you will need:



The Vehicle Identification Number (VIN) of

each vehicle you want to activate.



Your main user’s log-in and password; new

customers will be asked to register.



If you are a new customer, you will need

company credit card information or invoice

number as further proof of customer identifi

cation. Don’t worry, you will not be charged.



Go to activate.verizonconnect.com/ram/

#login. If you are an existing Verizon Connect

customer, enter your company’s log-in

credentials. New customers will need to



Manually enter the VIN(s) or upload a CSV file

with your VINs. A vehicle name is optional

and can be added later. Follow online instruc

tions to complete your vehicle entry.



Create a password and enter billing informa

tion. An email will be sent to you to complete

the final step. After that, you will be ready to

log-in and access Verizon Connect Fleet!



You are good to go! You will receive an email

confirming your vehicles are now online.

For more information, or to learn more, visit

www.verizonconnect.com/ram/.

Ram Telematics General Information

Modification Statement
Magneti Marelli has not approved any changes

or modifications to this device by the user. Any

changes or modifications could void the user’s

authority to operate the equipment.
Magneti Marelli n'approuve aucune

modification apportée à l'appareil par

l'utilisateur, quelle qu'en soit la nature. Tout

changement ou modification peuvent annuler

le droit d'utilisation de l'appareil par l'utilisateur.

WARNING!

Do not plug in or remove the iPod® or

external device while driving. Failure to follow

this warning could result in a collision.

20_VF_OM_EN_USC_t.book Page 236

Summary of Contents for PROMASTER 2020





































































































































































































































































Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands

RAM Commercial PROMASTER 2020, Owner'S Manual

Search results

Summary of Contents for PROMASTER 2020

Reviews:

Related manuals for PROMASTER 2020

Brands by name

Popular brands