manualshive.com logo in svg

RAM Commercial PROMASTER 2020, Owner'S Manual

The RAM Commercial PROMASTER 2020 is a versatile and reliable work vehicle built for efficiency. For a convenient and easy-to-use guide on operating this exceptional model, our Quick Reference Manual is available for free download from our website. Access your user manual today and maximize the potential of your PROMASTER 2020.

Share
Download
background image

124

IN CASE OF EMERGENCY

 

3. Remove and replace the bulbs as needed.

Dome Lamp Light Bulbs

4. Close the housing cover making sure it 

snaps together properly and connect the 

lamp.

5. Install overhead console into place making 

sure to seat the assembly’s forward end 

first and then snapping it flush so that the 

tension spring is fully seating in the housing.

FUSES

Underhood Fuses

The Front Power Distribution Center is located 

on the driver’s side of the engine compartment. 

To access the fuses, remove the cover.

Front Power Distribution Center

The ID number of the electrical component 

corresponding to each fuse can be found on the 

back of the cover.

WARNING!

When replacing a blown fuse, always use 

an appropriate replacement fuse with the 

same amp rating as the original fuse. Never 

replace a fuse with another fuse of higher 

amp rating. Never replace a blown fuse with 

metal wires or any other material. Do not 

place a fuse inside a circuit breaker cavity 

or vice versa. Failure to use proper fuses 

may result in serious personal injury, fire 

and/or property damage.

Before replacing a fuse, make sure that the 

ignition is off and that all the other services 

are switched off and/or disengaged.

If the replaced fuse blows again, contact an 

authorized dealer.

If a general protection fuse for safety 

systems (air bag system, braking system), 

power unit systems (engine system, trans

-

mission system) or steering system blows, 

contact an authorized dealer.

20_VF_OM_EN_USC_t.book  Page 124  

Summary of Contents for PROMASTER 2020





































































































































































































































































Reviews:

No comments

Related manuals for PROMASTER 2020

U.S. General 97845 Set Up And Operating Instructions preview
97845
Brand: U.S. General Pages: 5
Saab B205 Installation Instructions Manual preview
B205
Brand: Saab Pages: 10
GOgroove SMARTmini AUX Operating Manual preview
SMARTmini AUX
Brand: GOgroove Pages: 9
Velleman CAMCOLC1N User Manual preview
CAMCOLC1N
Brand: Velleman Pages: 6
Edelbrock For 1985-1992 GM Cars and Trucks 17933 Installation Instructions preview
For 1985-1992 GM Cars and Trucks 17933
Brand: Edelbrock Pages: 4
Havis-Shields 1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28 Install Instructions preview
1997-2007 Dodge Dakota Telescoping Computer Base C-TCB-28
Brand: Havis-Shields Pages: 3
Eaton Green Motion DC 66 User Manual preview
Green Motion DC 66
Brand: Eaton Pages: 18
Motoalliance VIPER MA11922 Install Instructions Manual preview
VIPER MA11922
Brand: Motoalliance Pages: 8
Skoda Superb 2006 Owner'S Manual preview
Superb 2006
Brand: Skoda Pages: 281
DFI VC230-BT Installation Manual preview
VC230-BT
Brand: DFI Pages: 6
Volvo 1989 780 Owner'S Manual preview
1989 780
Brand: Volvo Pages: 123
Needit Park Mini User Manual preview
Park Mini
Brand: Needit Pages: 2
Gemini KIT ParkingSensor 814 Installation And Use Manual preview
KIT ParkingSensor 814
Brand: Gemini Pages: 6
Cadillac 2001 Eldorado Owner'S Manual preview
2001 Eldorado
Brand: Cadillac Pages: 335
EUFAB 12014 Manual preview
12014
Brand: EUFAB Pages: 20
Coolster CHALLENGER GK-6125A 2018 Manual preview
CHALLENGER GK-6125A 2018
Brand: Coolster Pages: 45
Edelbrock 8135 Installation Instructions preview
8135
Brand: Edelbrock Pages: 4
Curt Group 60638 Installation Manual preview
60638
Brand: Curt Group Pages: 3

Brands by name

Popular brands

Load more brands