RAM Commercial PROMASTER 2017, Owner'S Manual

Page: 141 / 354

associated with that particular memory location. The dis-
play shows the preset number and frequency of the asso-
ciated station for three seconds. The display will then
return to the previous view.
Retuning the band: When the BAND/AS button is pushed
for less than two seconds, the radio will alternate between
bands in the sequence: FM1
FM2 FM3 AM1
AM2 FM1. While changing bands from the FM3
band to AM1, the display will show
⬙
AM
⬙
for two
seconds and when changing from the AM2 band to
FM1, the display will show
⬙
FM
⬙
for two seconds.
The display will then show the selected band and fre-
quency in the format
⬙
F1 106.9
⬙
for two seconds and then
return to the previous view.
Presetting stations with a strong signal: when the
BAND/AS button is pushed for more than two seconds,
the radio will search for the 6 best stations and automati-
cally store them in the 6 memory positions of the current
band. During the search, the display will indicate
⬙
FM AST
⬙
or
⬙
AM AST
⬙
, depending on the band selected. To record
the stations that are found, these are sorted in ascending
order of frequency and the first one is stored in memory
position 1, and so on, until positions 1-6 are all in use. If
fewer than 6 stations are found, the unused channels will
be allocated to the 107.9 MHz frequency for FM and AM
1710 KHz for the AM band. At the end of the search
process, the radio tunes in to the first preset position and
the display will indicate the associated preset number (1)
and the station frequency for three seconds. The display
will then return to the previous view.
Setup Menu
You can use the Setup menu to change the various factory
settings to suit your own preferences.
Push MENU to activate the Maximum Volume function.
Repeatedly pushing this button will activate the other
functions in the following sequence: Maximum Volume
(MVOL)
Auto Switch (AUTO) Beep (BEEP) Set
Clock Maximum Volume (MVOL). If this button or
the button for adjusting the selected function is not
pushed for five seconds or if the ROTARY knob is
pushed, the display returns to the previous view and
the changes will be saved.
Maximum Volume
This function allows you to set the maximum permissible
volume. Turn the ROTARY knob to set the volume. The
display will show a message in the format
⬙
MVOL 26
⬙
4
UNDERSTANDING YOUR INSTRUMENT PANEL 139