RAM Commercial CHASSIS CAB 3500 2021 Owner'S Manual Download

Page: 117 / 463

GETTING TO KNOW YOUR INSTRUMENT PANEL

115

REEN

NDICATOR

IGHTS

Adaptive Cruise Control (ACC) Set With

Target Light — If Equipped

This will display when the ACC is set

and a the vehicle in front is detected

page 166.

Adaptive Cruise Control (ACC) Set With

No Target Detected Indicator Light — If

Equipped

This light will turn on when the

Adaptive Cruise Control is SET and

there is no vehicle in front detected

page 166.

Automatic Diesel Exhaust Brake Indicator

Light — If Equipped

This indicator light will illuminate

when the Diesel Exhaust Brake has

been activated, and has switched to

Automatic mode

page 164.

ECO Mode Indicator Light — If Equipped

This light will turn on when ECO Mode

is active.

Park/Headlight On Indicator Light

This indicator light will illuminate

when the park lights or headlights are

turned on.

Front Fog Indicator Light — If Equipped

This indicator light will illuminate

when the front fog lights are on.

Turn Signal Indicator Lights

When the left or right turn signal is

activated, the turn signal indicator

will flash independently and the

corresponding exterior turn signal

lamps will flash. Turn signals can be activated

when the multifunction lever is moved down

(left) or up (right).

NOTE:



A continuous chime will sound if the vehicle is

driven more than 1 mile (1.6 km) with either

turn signal on.



Check for an inoperative outside light bulb if

either indicator flashes at a rapid rate.



If equipped with fog lamps, the fog lamp on

the side of the activated turn signal will also

illuminate to provide additional light when

turning.

Cruise Control Set Indicator Light — If

Equipped

This indicator light will illuminate

when the cruise control is set to the

desired speed

page 164.

HITE

NDICATOR

IGHTS

Adaptive Cruise Control (ACC) Ready

Light — If Equipped

This light will illuminate when the

vehicle equipped with ACC has been

turned on but not set

page 166.

Cruise Control Ready Indicator

This indicator light will illuminate

when the cruise control is ready, but

not set

page 164.

Set Speed Display

The Set Speed Display indicator light

indicates the set speed for the Speed

Control and ACC settings.

21_DPF_OM_EN_USC_t.book Page 115

Summary of Contents for CHASSIS CAB 3500 2021
















































































































































































































































































































































































































































































Search results

Summary of Contents for CHASSIS CAB 3500 2021

Reviews:

Related manuals for CHASSIS CAB 3500 2021

Brands by name

Popular brands

RAM Commercial CHASSIS CAB 3500 2021, Owner'S Manual

Search results

Summary of Contents for CHASSIS CAB 3500 2021

Reviews:

Related manuals for CHASSIS CAB 3500 2021

Brands by name

Popular brands