RAM Commercial CHASSIS CAB 3500 2021 Owner'S Manual Download

Page: 166 / 463

164

STARTING AND OPERATING

If necessary, add fluid to restore to the proper

indicated level. With a clean cloth, wipe any

spilled fluid from all surfaces

page 444.

CRUISE CONTROL SYSTEMS — IF EQUIPPED

Your vehicle may be equipped with the Cruise

Control system, or the Adaptive Cruise Control

(ACC) system:



Cruise Control for cruising at a constant

preset speed.



Adaptive Cruise Control (ACC) for maintaining

a set distance between you and the vehicle

ahead using Fixed Speed Cruise Control to

automatically adjust the preset speed.

NOTE:

In vehicles equipped with ACC, if an ACC

distance is not set, Fixed Speed Cruise Control

will not detect vehicles directly ahead of you.

Always be aware of the mode selected.

RUISE

ONTROL

— I

QUIPPED

When engaged, the Cruise Control takes over

accelerator operations at speeds greater than

20 mph (32 km/h), or 25 mph (40 km/h),

depending on the powertrain equipped in the

vehicle.
The Cruise Control buttons are located on the

right side of the steering wheel.

Cruise Control Buttons

NOTE:

In order to ensure proper operation, the Cruise

Control system has been designed to shut down

if multiple speed control functions are operated

at the same time. If this occurs, the Cruise

Control system can be reactivated by pushing

the Cruise Control on/off button and resetting

the desired vehicle set speed.

To Activate

Push the on/off button to activate the Cruise

Control. The cruise indicator light in the

instrument cluster display will illuminate.

To turn the system off, push the on/off button

a second time. The cruise indicator light will turn

off. The system should be turned off when not in

use.

CAUTION!

Do not use chemical flushes in your power

steering system as the chemicals can

damage your power steering components.

Such damage is not covered by the New

Vehicle Limited Warranty.

1 — On/Off Button
2 — CANCEL
3 — RES (+)
4 — SET (-)

WARNING!

Leaving the Cruise Control system on

when not in use is dangerous. You could

accidentally set the system or cause it to go

faster than you want. You could lose control

and have an accident. Always leave the

system off when you are not using it.

21_DPF_OM_EN_USC_t.book Page 164

Summary of Contents for CHASSIS CAB 3500 2021
















































































































































































































































































































































































































































































Search results

Summary of Contents for CHASSIS CAB 3500 2021

Reviews:

Related manuals for CHASSIS CAB 3500 2021

Brands by name

Popular brands

RAM Commercial CHASSIS CAB 3500 2021, Owner'S Manual

Search results

Summary of Contents for CHASSIS CAB 3500 2021

Reviews:

Related manuals for CHASSIS CAB 3500 2021

Brands by name

Popular brands