RAM Commercial 2018 PROMASTER Owner'S Manual Download Page 71

Page: 71 / 337

Location And Controls

The instrument cluster display features a driver-interactive

display that is located in the instrument cluster.

This system allows the driver to select a variety of useful

information by pushing the switches mounted on the

instrument panel. Examples of menu items are:

•

Speed Beep

•

Buzzer Volume

•

Seat Belt Buzzer (Just Available After SBR Disable Made

By CHR Service)

•

Service (Diesel Only)

•

Exit Menu

If equipped with a Uconnect system, some customer pro-

grammable features will display in the radio. Refer to the

“Uconnect Settings” in “Multimedia” for further informa-

tion.
The system allows the driver to select information by

pushing the following buttons mounted on the instrument

panel to the left of the steering column:

Instrument Cluster Display

Display Control Buttons

GETTING TO KNOW YOUR INSTRUMENT PANEL 69

Summary of Contents for 2018 PROMASTER


















































































































































































































































































































































Search results

Summary of Contents for 2018 PROMASTER

Reviews:

Related manuals for 2018 PROMASTER

Brands by name

Popular brands

RAM Commercial 2018 PROMASTER, Owner'S Manual

Search results

Summary of Contents for 2018 PROMASTER

Reviews:

Related manuals for 2018 PROMASTER

Brands by name

Popular brands