RAM Commercial 2018 PROMASTER Owner'S Manual Download Page 288

Page: 288 / 337

FLUID CAPACITIES

U.S.

Metric

Fuel (Approximate)

24 Gallons

90 Liters

Engine Oil With Filter
3.6L Engine (SAE 5W-20, API Certified)

6 Quarts

5.6 Liters

Cooling System *
3.6L Engine (Mopar Antifreeze/Engine Coolant 10 Year/

150,000 Mile Formula or equivalent)

10.5 Quarts

10 Liters

FLUIDS AND LUBRICANTS

Engine

Component

Fluid, Lubricant, or Genuine Part

Engine Coolant

We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT

(Organic Additive Technology) meeting the requirements of FCA Material Standard

MS.90032.

Engine Oil

We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements

of FCA Material Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix. Refer to your

engine oil filler cap for correct SAE grade.

Engine Oil Filter

We recommend you use Mopar Engine Oil Filters.

Spark Plugs

We recommend you use Mopar Spark Plugs.

Fuel Selection

87 Octane, 0-15% Ethanol.

286 TECHNICAL SPECIFICATIONS

Summary of Contents for 2018 PROMASTER


















































































































































































































































































































































Search results

Summary of Contents for 2018 PROMASTER

Reviews:

Related manuals for 2018 PROMASTER

Brands by name

Popular brands

RAM Commercial 2018 PROMASTER, Owner'S Manual

Search results

Summary of Contents for 2018 PROMASTER

Reviews:

Related manuals for 2018 PROMASTER

Brands by name

Popular brands