Fitting Instructions for RRP 563
1
Fitting Instructions for RRP Tractive Hydraulic Preload Adjuster
Husqvarna 701-RRP 563
DO NOT ATTEMPT TO COMMENCE THIS WORK WITHOUT A MECHANICAL SPRING
COMPRESSOR, OR CONSULT A SUSPENSION SPECIALIST
NOTE: BEFORE COMMENCING WORK ON THE CONVERSION, TAKE TIME TO READ THE INSTRUCTIONS
CAREFULLY. ALL WORK CAN BE CARRIED OUT BY A COMPETENT MECHANIC, BUT IF YOU ARE UNSURE
PLEASE CONTACT US OR A MECHANICAL PROFESSIONAL
Put the motorcycle on a stand so that the rear wheel is off the ground. Make sure the vehicle is
secured so that it will not fall over.
1.
Remove seat by pulling back front corner of seat,
both sides, to unlatch pegs. Pull cord under left
side panel to release seat catch, and pull seat off
by sliding back and up.
