39
FENDERS
Rear Fender
The rear fender is mounted at the seatstay brace. There are two ways in which to mount your rear
fender. The first is the screw mounting system (see figure 3), and the second is the 10mm bolt and
screw system (see figure 4). Identify the mounting system used on your bicycle and follow the given
instructions for that particular type of mounting system.
1. Screw Mounting System
First remove the rear wheel. Place the fender assembly between the stays, making sure the fender
bracket holes line up with those in the frame. Attach the fender by using two screws to directly mount
the fender onto the frame. The mounts are located below the seat post and near the rear of the crank.
Tighten all screws until snug.
2. 10mm Bolt and Screw System
First remove the rear wheel. Place the fender assembly between the stays, making sure the fender
bracket holes line up with those in the frame. Attach the fender by using one screw to directly mount the
fender onto the frame near the crank. Next, use the 10mm hex bolt and nut to attach the fender to the
brace between the seat stays, near the seat post. Tighten all bolts and screws until snug.
figure 3
figure 4
