BORESCOPE
11
EN
TROUBLESHOOTING
Fault
Possible causes
Method
Unable to
Power-on
1.Dead Battery
2.Incorrect Installation
1.Please recharge or replace the battery.
2.Please check the battery and battery
compartment contact if it is dirt or
deformation then reinstall the battery
Auto Power-off
Low Battery
Please recharge or replace the battery.
Boot screen
stuck
1. System Booting
Failure
2. Interface of the Data
Cable is Dirty Data
Cable Dysfunction
1. Restart the APP/Phone
2. Clean the Cable Interface and Plug
again Replace the Data Cable
1. The APP didn’t get
the Permission Access
APP incompatible with
the OS
1. Allow the Permission Access in the
Permission Manager
2. Uninstall the APP and install a new one
Try another Phone to Check whether the
Borescope is Dysfunction or not
Image cannot
be recorded or
found
The APP didn't get the
Permission Access
1. Allow the Permission Access in the
Permission Manager
2
.
Uninstall the APP and install a new one
3. Search“FINDERCameraData" in the
File of the Phone Storage
Can't charge
1.The charging interface
is dirty.
2.Damaged charging
cable.
1.Clean the charging interface and replug it.
2.Replace the charging cable or adapter
Blurry Image
1.The probe is dirty.
2.Probe is not within the
range of the depth
-of-field.
3.Damaged lens due to
high temperature.
1.Clean the probe with the lint-free cloth
within the package.
2.Please place the probe within the depth
of field range of 20-100mm.
3.Do not place the probe in a high
temperature environment (below 70°C).
The probe
steering range
is too small
Snake tube is distorted
Please place the snake tube straight
