RAKwireless RAK7249, User Manual

Page: 13 / 22

13
RAK
7249
13 RAK7249 User Manual V1.3
The RAK7249 mainboard provide a Reset key and 6* LEDs for status indication.The
The function of the Reset key is as follows:
Short press : Restart the Gateway;
Long press (5s and above) : Restore Factory Settings;
The status of the LEDs is described as below. Please refer to the printing of the LEDs
on the mainboard.
LEDs Status Indication Description
LED1(PWR)
 Power Indicator, Led on when device power on
LED2(ETH)
 ON - linkup
 OFF - linkdown
 Flash - Data Transmitting and Receiving
LED3(LoRa1)
 ON - LoRa1 is working

OFF
- LoRa1 is not working
 Flash - Indicate that LoRa1 Packet
receiving and sending
LED4(LTE)
 Slow Flash 1 (200ms Bright/1800ms Dark)
- unregistered network (in search)
 Slow Flash 2 (200ms Dark/1800ms Bright)
- idle status(online)
 Flash - Data Transmitting and Receiving

ON
- Voice is working
LED5(LoRa2
for 16 channel
)
 ON - LoRa2 is working

OFF
- LoRa2 is not working
 Flash
- Indicate that LoRa2 Packet
 receiving and sending
LED6(WLAN)

AP Mode
:
ON - WLAN is working;
Flash - Data Transmitting and Receiving
 STA Mode :
Slow Flash (1Hz) - Connection Disconnected;
ON - Connection Successful;
 Flash - Data Receiving and Sending;
Table 5 | LEDs Status Description