When the device is correctly positioned a green LED will flash in the RAMPI and a
window will pop-up in Rasoft Pro prompting the device to be named and
associated to a Room. Having done this go to the Device editor page select the
inputs as necessary and assign the associated actions. This will be a single action
such as selecting a scene. If a macro function is desired then select the Macro
radio button and a drop down menu of actions will appear (the actual macro steps
are defined under the Macro tab). Having input the required actions click on the
Data Transfer tab and click Upload to device. Rasoft will issue a prompt to hold
the RAMPI against (or near) the RCI-7M. When transferring data a progress bar
will appear in Rasoft Pro and a solid green LED will appear on the RAMPI.
To confirm the RCI-7M has been correctly programmed activate the connected
switches. The RAMPI has an internal wireless receiver which will detect the
transmissions and display the transmissions in the bottom right hand corner of
Rasoft Pro.
For more detailed information on programming the RCI-7M refer to the set-up
guide from
or Help/Set-up guides within Rasoft
Pro.
General
Rako thanks you for having purchased a Rako product and hopes that you are
pleased with your system. Should for any reason you need to contact us please
contact us via our website
www.rakocontrols.com
or by phoning our customer help
line on 01634 226666.
